User Tools

Site Tools


blog:better_receiver_info_for_ho26

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

blog:better_receiver_info_for_ho26 [2015/06/11 06:38] (current)
Jamie McCallum
Line 1: Line 1:
 +====== Better receiver info for Ho26 ======
 +
 +A new procedure has been added to both sched_initi and postob which will check the focus platform position and adds a comment to the log saying which receiver this corresponds to. For AUSTRAL experiments,​ please make sure that this reports that the "S/X receiver is on axis". You can cross-check the rxp values against the nominal receiver positions [[http://​ra-wiki.phys.utas.edu.au/​index.php?​n=MtPleasant26m.ReceiverPositionsAndSystemTemperatures|here]]. NB - if Hobart can't get a monitoring connection to the drive PC it will report the rxp values as 1000 mm. If this is the case, you should probably reboot the drive PC and restart the FS.
 +
 +{{tag>}}
 +
 +
 +~~DISCUSSION~~
  
/home/www/auscope/opswiki/data/pages/blog/better_receiver_info_for_ho26.txt · Last modified: 2015/06/11 06:38 by Jamie McCallum