User Tools

Site Tools


blog:continuous_cal

Continuous cal at Yg

The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-band continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude.

Brett Reid

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/blog/continuous_cal.txt · Last modified: 2013/07/26 09:29 by Moblas people