User Tools

Site Tools


blog:continuous_cal

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
blog:continuous_cal [2013/07/26 09:05]
Moblas people
blog:continuous_cal [2013/07/26 09:06]
Moblas people
Line 1: Line 1:
-====== Continuous cal ======+====== Continuous cal at Yg ======
 The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-bant continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude. \\ The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-bant continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude. \\
  
/home/www/auscope/opswiki/data/pages/blog/continuous_cal.txt · Last modified: 2013/07/26 09:29 by Moblas people