User Tools

Site Tools


blog:continuous_cal

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
blog:continuous_cal [2013/07/26 09:05]
Moblas people
blog:continuous_cal [2013/07/26 09:29]
Moblas people
Line 1: Line 1:
-====== Continuous cal ====== +====== Continuous cal at Yg ====== 
-The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-bant continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude. \\+The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-band continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude. \\
  
 Brett Reid Brett Reid
/home/www/auscope/opswiki/data/pages/blog/continuous_cal.txt · Last modified: 2013/07/26 09:29 by Moblas people