User Tools

Site Tools


blog:continuous_cal

This is an old revision of the document!


Continuous cal at Yg

The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-bant continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude.

Brett Reid

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/blog/continuous_cal.1374829596.txt.gz · Last modified: 2013/07/26 09:06 by Moblas people