User Tools

Site Tools


blog:dbbc_configuration_with_new_ifa_ifb_firmware_swap

DBBC configuration with new IFA/IFB firmware swap

  • Placed new firmware file, called dbbc2_IFA_IFB_swap.bit in C:\DBBC_CONF\FilesDBBC
  • In C:\DBBC_CONF, edit conf.cmd and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
  • In C:\DBBC_CONF, edit “geo” config files and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
  • In “geo” config files, swapped first 4 freqs with second four
  • re-started DBBC server, configured
  • dbbcifa=1,agc,4
  • dbbcifb=4,agc,1
  • dbbcifc=2,agc,2
  • dbbcifd=2,agc,2
  • dbbcifa reports 48066 0 atten
  • dbbcifb reports 54899 8 atten
  • dbbcifc reports low power (unrelated S-band problem, being investigated now)
  • dbbcifd reports low power (unrelated S-band problem, being investigated now)
  • reg=1,17,4
  • reg=5,17,4
  • reg=1,19,4
  • reg=5,19,4
  • pps_sync
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/blog/dbbc_configuration_with_new_ifa_ifb_firmware_swap.txt · Last modified: 2011/11/22 03:20 by Jim Lovell