User Tools

Site Tools


blog:dbbc_configuration_with_new_ifa_ifb_firmware_swap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

blog:dbbc_configuration_with_new_ifa_ifb_firmware_swap [2011/11/22 03:20] (current)
Jim Lovell
Line 1: Line 1:
 +====== DBBC configuration with new IFA/IFB firmware swap ======
 +
 +  * Placed new firmware file, called dbbc2_IFA_IFB_swap.bit in C:​\DBBC_CONF\FilesDBBC
 +  * In C:​\DBBC_CONF,​ edit conf.cmd and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
 +  * In C:​\DBBC_CONF,​ edit "​geo"​ config files and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
 +  * In "​geo"​ config files, swapped first 4 freqs with second four
 +  * re-started DBBC server, configured
 +  * dbbcifa=1,​agc,​4
 +  * dbbcifb=4,​agc,​1
 +  * dbbcifc=2,​agc,​2
 +  * dbbcifd=2,​agc,​2
 +  * dbbcifa reports 48066 0 atten
 +  * dbbcifb reports 54899 8 atten
 +  * dbbcifc reports low power (unrelated S-band problem, being investigated now)
 +  * dbbcifd reports low power (unrelated S-band problem, being investigated now)
 +  * reg=1,17,4
 +  * reg=5,17,4
 +  * reg=1,19,4
 +  * reg=5,19,4
 +  * pps_sync
 +  * 
 +
 +{{tag>}}
 +
 +
 +~~DISCUSSION~~
  
/home/www/auscope/opswiki/data/pages/blog/dbbc_configuration_with_new_ifa_ifb_firmware_swap.txt · Last modified: 2011/11/22 03:20 by Jim Lovell