User Tools

Site Tools


blog:katherine_temperature_humidity_sensors

This is an old revision of the document!


Katherine temperature & humidity sensors

The temperature and humidity sensors in the Katherine control and maser rooms have been recalibrated using the data from the loggers (24/7/14, ~1030 UT). Data from Monica recorded before this time can be rescaled using the formulae below:

Control Room:

TrueRH = MonicaRH*1.2 + 4,7

TrueTemp=MonicaTemp*0.9 + 0.66

Maser Room:

TrueRH = MonicaRH*0.83+32

TrueTemp=MonicaTemp

The temperature and humidity sensors in the Katherine pedestal and hub have been recalibrated using the data from the loggers (date and time). Data from Monica recorded before this time can be rescaled using the formulae below:

Pedestal:

TrueRH = MonicaRH*0.95 + 23

TrueTemp=MonicaTemp*0.92 + 0.32

Hub:

TrueRH = MonicaRH

TrueTemp=MonicaTemp

Feed

Feed temp & RH sensors newly installed.

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/blog/katherine_temperature_humidity_sensors.1406255104.txt.gz · Last modified: 2014/07/25 02:25 by Jamie McCallum