User Tools

Site Tools


blog:log_monitor_26m_support_and_recorder_status

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

blog:log_monitor_26m_support_and_recorder_status [2015/08/11 05:02] (current)
Jim Lovell
Line 1: Line 1:
 +====== Log monitor 26m support and recorder status ======
 +The log monitor now knows about the 26m by default and will ring a local alarm if run from ops1hb.
  
 +The log monitor also shows the recorder status and scan name. Recorder status is obtained by noticing the disk_record command. It doesn'​t actually know for sure if the Mark5 is running but just reports what the recorder should be doing, so always check dimino and the cameras to be absolutely sure!
 +
 +
 +{{tag>}}
 +
 +
 +~~DISCUSSION~~
/home/www/auscope/opswiki/data/pages/blog/log_monitor_26m_support_and_recorder_status.txt · Last modified: 2015/08/11 05:02 by Jim Lovell