User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

blog:x-band_signal_path_at_yg [2012/05/02 03:09] (current)
Jim Lovell
Line 1: Line 1:
 +====== X-band signal path at Yg ======
 +Brett and Randall have re-wired the X-band cables in the feed tube,
 +made sure the colours correct and checked the LNAs are correctly labeled for polarisation.
 +Moved the X-band cross-over switch to Direct (note RFBox interface shows it to be crossed, but it's not!)
 +{{tag> Yg}}
/home/www/auscope/opswiki/data/pages/blog/x-band_signal_path_at_yg.txt · Last modified: 2012/05/02 03:09 by Jim Lovell