skip to content
AuScope VLBI Operations Wiki
You are here:
Documentation for operators
This is an old revision of the document!
Recording continued on HOB+0128/32000 from 10917
System check OK. halt issued at 01:08:37 UT, shcedule resumed at 01:39:18 UT
When looking for the timestamp of first halt command, typed halt into input rather than search at 01:40:54 UT, schedule quickly resumed at 01:41:21 UT
Recording continued on HOB+0123/32000 from 11780
Internet connection and eRC failed right before the schedule changeover, but change apparently happened smoothly
Delay difference >0.5s. Reset DBBC and recording restarted at 10:18:17 (delay difference is -0.285 us)
Recording started on a new module HOB+1006/16000 from 0
Bank B Module swap to 32 TB at 03:12 UT - recording continued on current module HOB+1006/10361.15
System ckeck OK. halt issued at 03:09:22 schedule resumed at 03:40:13
Schedule resume produced error
ERROR bo -124 No (scan_name=…) observation starting at a future time found in schedule.
so I started a1404 manually @ 03:46 UT
You could leave a comment if you were logged in.
· Last modified: 2014/09/07 03:53 by
Back to top