User Tools

Site Tools


handover:aov008

This is an old revision of the document!


aov008

Hobart 12m:

Data volume at beginning:5177 Disk VSN: USN+0221

  • 18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)
    1. First Scan for which data was recorded was 076-1839 at 18:39:03
    2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 10.7 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?
  • 21:48 UT mk5=dot? time was close to 24 ms. (AK)

Katherine 12m:

Disk VSN:HART+106

Data volume at beginning:

  • 18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)
    1. First Scan for which data was recorded was 076-1839 at 18:39:03
    2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 9.1 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?
  • 21:12 UT Katherine had the following errors. pcfs was running and everything seemed fine (AK)
    1. WARNING: No PCFS activity for 34.5 minutes.
    2. Check VNC session to see if Field System software is running
    3. Check network connection
  • 07:52 Log monitor and eRemote keep losing connection, either with field system or losing log file setting off inactivity alarm. All is still working on pcfs (Ross)

Yarragadee 12m:

Disk VSN:HAY-0049

Data volume at beginning:

  • 18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)
    1. First Scan for which data was recorded was 076-1839 at 18:39:03
    2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 9.8 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?
  • 22:04 UT WARNING: error an -103 pointing computer tracking errors are too large and error qo -301 warning: onsource status is slewing! (AK)
  • 0158 UT Power glitch at Yarragadee caused DBBC to reboot. Reconfigured & resynched DBBC. Back on schedule for 077-0208. All scans between 077-0158 and 077-0208 lost (JMc)
  • 05:07 UT Windstowed, missed scans 077-0510 through 077-0513 (Ross)
  • 06:55 UT Windstowed, missed scans 077-0654 through 077-0513 (Ross)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov008.1458201264.txt.gz · Last modified: 2016/03/17 07:54 by Jesse Swan