User Tools

Site Tools


handover:aua009

This is an old revision of the document!


AUA009

Hobart (12m)

Module: HOB+0042, start pos: 4784.542 GB

  • 1753 UT - Experiment started late, but seems to be running ok. (Nick)
  • 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)
  • get quite a few 'Tsys value for device id overflowed or was less than zero.' errors. (Nick)
  • caltsys disabled at 0130 as this was causing significantly shortened scans (missing approximately 10s of each scan). Disk pos lagging by 400 GB due to late start and this problem. (JMc)

Hobart (26m)

Module: HOB+0033, start pos: 0 GB

  • 1753 UT - Experiment started late, but seems to be running ok. (Nick)
  • 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)
  • Get a lot of errors as follows:
    • 'ERROR ch -302 v1 frequency does not check with requested value'
    • 'ERROR ch -308 ve total power integrator overflow'
    • 'ERROR ch -317 Total power integrator overflow on IF2'
    • 'ERROR ch -350 The Receiver 20K stage is hotter than 40K'

Katherine

Module: HOB+0119, start pos: 3605.989 GB

  • 1753 UT - Experiment started late, but seems to be running ok. (Nick)
  • 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)

Yarragadee

Module: HOB+0130, start pos: 3429.876 GB

  • 1753 UT - Experiment started late, but seems to be running ok. (Nick)
  • 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)
  • caltsys disabled at 0130 as this was causing significantly shortened scans (missing approximately 10s of each scan). Disk pos lagging by 450 GB due to late start and this problem. (JMc)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aua009.1456277647.txt.gz · Last modified: 2016/02/24 01:34 by Jamie McCallum