User Tools

Site Tools


handover:aust53

This is an old revision of the document!


aust53

Hobart (26m)

  • 2014.289.05:24 LO reported to be unlocked, no alarm
  • 04:38 UT: wiring error of pps at Hobart was corrected. Don't know what the impact was before
  • The LO unlocked several times for short periods from 23:00 till 01:30 UT (Liza)
  • rxp#Receiver focus X : -256.4mm ; Y : 250.8mm ; Z : 18.6mm; – Y should be 248mm (Liza)
  • Recording to 4 TB module USN-0014 in bank B, +0 GB (Chris)
  • (11:50 UT) Just noticed that the receiver has become unlocked at a few points (Chris)
    • 10:33 UT
    • 10:38 UT
    • 11:08 UT
    • 11:09 UT
    • 11:13 UT
    • 11:48 UT
    • 13:00 UT Moved dish about and seemed to fix unlock problem by about 12:30 with some subsequent intermittent (mostly momentary) loss of lock.(warren)
    • lost lock at 18:38 to 18:47 (w)
    • again unlocked 20:20 and 21:02 and 21:20 (w)

Hobart (12m)

  • 04:38 UT: wiring error of pps at Hobart was corrected. Don't know what the impact was before
  • Recording to 6 TB module HAY-0055 in bank B, +0 GB (Chris)

Katherine

  • Recording to 8 TB module HOB+0068 in bank A, +0 GB (Chris)
  • Running on an SSH remote-control (Warren, Liza)

Yarragadee

  • Recording to 6 TB module OAN+0103 in bank A, +0 GB (Chris)
  • Recording error documented (Liza):

2014.289.04:55:01 ALARM: error m5 -104 mk5cn: time-out, connection closed

    2014.289.04:55:07 ALARM: error m5 -104 mk5cn: time-out, connection closed
    2014.289.04:55:07 Alarm acknowledged
    2014.289.04:55:12 ALARM: error m5 -104 mk5cn: time-out, connection closed
    2014.289.04:55:14 WARNING:  0 : 0x02340003 : 23 : data read error ; 
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aust53.1413437252.txt.gz · Last modified: 2014/10/16 05:27 by liza