User Tools

Site Tools


handover:crds96

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
handover:crds96 [2018/06/20 18:23]
Noor Md Said
handover:crds96 [2018/06/21 16:18] (current)
Patrick Yates
Line 1: Line 1:
 ====== CRDS96 ====== ====== CRDS96 ======
  
-__Hobart 26m__+**Hobart 26m**
  
 Disk VSN: HOB+0119/​32000 | data volume at the begining 19828.475 GB. Disk VSN: HOB+0119/​32000 | data volume at the begining 19828.475 GB.
Line 7: Line 7:
 1800UT- Experiment started OK (mas) 1800UT- Experiment started OK (mas)
  
 +When experiment started, received " WARNING: error qo -301 warning: onsource status is slewing!"​ for each scan. All clocks at FMSET are synchronise. ​
  
 +23:30UT - Autocorrelation spectra not updating. Lucas fixed based on similar error where procedure file didn't include checkmk5 command (Ross).
  
-__Katherine 12m__+13:45UT - 70K stage at ~90K and climbing, pressure at 3.6 microns mercury. Heading out to Mt Pleasant to fix. (Patrick) 
 + 
 +**Katherine 12m**
  
 Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB. Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB.
Line 15: Line 19:
 1800UT- Experiment started OK (mas) 1800UT- Experiment started OK (mas)
  
-When experiment started, received "​Warning:​ error tc -301 continuous cal not enabled for dbbc" for every scan+When experiment started, received "​Warning:​ error tc -301 continuous cal not enabled for dbbc" for each scan
  
 +23:21UT - After discussion with Warren decided to reboot dbbc to see if that fixed continuous cal error. Halted after scan no0385, first good scan no0388 (Ross).
  
 +00:08UT - Noticed difference in procedure file between crds96 and previous crds experiments and corrected this error; missed scan no0394. Error still present, leaving for Warren to look at later (Ross).
  
-__Yarragadee 12m__+13:29UT - Fixed continuous cal not enabled error by changing ''​cont_cal=off''​ to ''​cont_cal=on''​ in the ''​setup01''​ function of the procedure file, based off the previous crds95 procedure file. (Patrick)
  
-Disk VSN: GSFC+022/​8000 | data volume at the begining 1.923 GB. + 
 +**Yarragadee 12m** 
 + 
 +Disk VSN: GSFC+022/​8000 | data volume at the begining 1.923 GB. Recorded 7469.724 GB on this disk. 
 + 
 +Disk 2 VSN: BKG-0065 | data volume at the begining 0.0 GB. 
  
 1800UT- Experiment started OK (mas) 1800UT- Experiment started OK (mas)
 +
 +16:09UT - Manually drudged summary files. Noticed that data for Yg & Ho is 8064GB, while module in mk5 is 8000GB. Called up Yg and swapped modules inbetween scans. Resumed schedule with scan No0551 at 16:11:58 (1:48 into scan). (Patrick)
 +
 +
  
  
/home/www/auscope/opswiki/data/attic/handover/crds96.1529519032.txt.gz · Last modified: 2018/06/20 18:23 by Noor Md Said