User Tools

Site Tools


handover:dynamic_schedule_ds275

Dynamic Schedule DS275

General Notes: With all three of the telescopes since my shift started (and I am pretty sure well before), there has been a lot of 'previous source in this schedule not reached before new source was commanded'. They look to be popping up every 15-17 minutes fairly consistently so it seem they are when the dynamic scheduler is grabbing a new schedule and executing mid slew of another schedule? (Tiege)

Hobart

Module: HOB+0097, unknown starting disc position

  • A few scans still slewing during scans. (Ellen)
  • 07:18:54 previous source in this schedule not reached before new source was commanded. (AK)

Katherine

Module: ULVBI-29, unknown starting disc position. USN-0062 (second disk) 0.000 GB

  • Module filled up so schedule stopped until someone can put another module in. (Ellen)
  • According to the logs, the last scan before it cut out was 275-0459. (Ellen)
  • 02:00 UT - Schedule resumed, first scan 276-0201 (Ross)
  • 02:11 UT - Large offset between formatter and maser delays, but it is stable (Ross)
  • 21:35 UT - Katherine Disk has filled up, there is less than 2 hours until the experiment ends so I don't think it is worth swapping too a fresh disk. First scan with module full was 276-2116. (Tiege)

Yarragadee

Module: HOB+0125, unknown starting disc position

  • A few scans still slewing during scans. (Ellen)
  • 13:49 UT - Tsys bands 09, 10, 12, 13 way too high. (Ellen)
  • 08:58 UT - previous source in this schedule not reached before new source was commanded (AK)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/dynamic_schedule_ds275.txt · Last modified: 2016/10/02 22:18 by Ellen Manning