This is an old revision of the document!
schedule=gt05yg,#1was entered. Recording for sband=direct(20v) from 0100 UT onwards. ifa power levels were very high, ifa was approx 39000 whilst ifb was around 29000. See Image 1 below
rfpic=*,cross. Recording for Sband=cross from 12:42UT onwards. The power levels were under control for this setting, ifa settled around 24800 whilst ifb settled around 29000. See Image 2 below
“rpfic=cross,directand as such may not have loaded the correct setting and just imported the default
rfpic=cross,crossand started recording for the sband=cross (14V) again. Power levels were stable and near the target power levels (ifa and ifb). See Image 3 below
rfpic=cross,directto record again for the s=direct 20v with the correct settings.
rfpic=cross,crossagain to observe at lower voltage because the peak was high in the spectrum analyser. Noticed a small drop followed by a big drop (Image:4) around 0218UT (not sure if this was related to the voltage setting or due to the spacecraft going out of view of the dish). The lower power level remained stable until 0220UT before the peak disappeared.
rfpic=direct,directto return to the normal ivs mode. Cancelled the
ireadcommand output every 10 sec, fs terminated, tracking stopped, antenna stowed, UTC1-UTC time difference brought back to 0.