User Tools

Site Tools


This is an old revision of the document!


Katherine 12m

Disk VSN: HOB+0022/6000/1024 | Data volume at beginning: 3471.081 GB

  • 1730UT Experiment started OK (Prad).

Yarragadee 12m

Disk VSN: OSOD-031 | Data volume at beginning: 0.000 GB

  • 1730UT Experiment started OK (Prad).
  • 2209UT ERROR m5 -900 Can't XLRappend() recording; m5 -904 MARK5 return code 4: error encountered (during attempt to execute). Some module problems. There was no space. Have to change the module (Simin).
  • 2230UT Module change. Disk VSN: USN+0220/8000/1024 | Data volume at beginning: 0.000 GB. Missed scans: 092-2209 to 092-2231 (Simin)

Hobart 26m

Disk VSN: HOB+1006/16000/1024 | Data volume at beginning: 11959.457 GB

  • 1730UT Experiment started OK (Prad).
  • 1740UT-1815UT connection to mk5 seemed to have been lost. Found that the Dimino wasn't running in mk5hb (surprising). Problem got solved once the DIMino was back up (Prad).
  • 0101UT ERROR qo -301 WARNING: ONSOURCE status is SLEWING! Wind stow (Simin).
  • 0117UT Back to the schedule. Missed scans: 093-0101a to 093-0117 (Simin).
  • 0650UT Clkoff command gives different values that's way apart, when used in pcfcho and pcfshb. Jamie said that he'll look into it (Jay).
  • 13:21UT - HOB+1006 is full, switched to HART+101 (Patrick)
  • 14:07UT - HART+101 is full. On my way to Mt Pleasant to put a new module in. (Patrick)
  • 15:05UT - Swapped out HART+101 for HOB+1007. Initial data on HOB+1007 is 0GB.
/home/www/auscope/opswiki/data/attic/handover/ohg118.1554304378.txt.gz · Last modified: 2019/04/03 15:12 by Warren Hankey