User Tools

Site Tools


This is an old revision of the document!


Jesse: I have edited the schedules so CRDS77 should start automatically after swapping to the correct module with a 1 minute delay (but you should definitely make sure this actually happens…) And cos I'm so nice, I even drudged the schedules for you, so it should roll straight over all by itself :) Well except for the 26m, you'll have to set that up. (Ellen)

Hobart 12m:

Disk VSN:UAO-0014/2000

Data volume at beginning: 0TB

  • 17:00 UT - Experiment started ok

Katherine 12m:

Disk VSN:HOB+0128/32000

Data volume at beginning: 23297TB

  • 17:00 UT - Experiment started ok
  • 17:35 UT - Delay difference crept up to -0.5us. Ran fmset and fixed it. (Ellen)

Yarragadee 12m:

Disk VSN: NRCAN-09/2000

Data volume at beginning: 0TB

  • 17:03 UT - Experiment started late due to network connection loss (in my sleep deprived state it didn't occur to me to call the station until just before it was meant to start). Only missed scan 138-1700b. (Ellen)
  • 17:06 UT - mk5=dot? returned value of almost -1. Ran fmset between scans and it came good, except the delay difference jumped 0.05us but is now steady again. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1688.1431970821.txt.gz · Last modified: 2015/05/18 17:40 by Ellen Manning