User Tools

Site Tools


handover:r1787

r1787

Hobart

Module: USN-0085, start pos 1573.233 GB

  • 1700 UT - Experiment started OK. (Ross)
  • Experiment end, change module to HOB+1007 for AOV015 (Warren)

Katherine

Module: HAY-0049, start pos 0 GB (should have been recorded to HAY-0047/6000 with mv007)

  • 1700 UT - mk5 connection issue, needed to restart dimino but could not terminate. Had to reboot mk5. This did not resolve problem. Repeated a further time but the commands in the pcfs system a taking up to a minute to take effect. Used IP switches to reboot both mk5 and pcfs, however pcfs cannot be pinged. Have rebooted several times and waited at least ten minutes. mk5 can be pinged. (Ross)
  • 1810 UT - pcfske successfully pinged. (Ross)
  • 1815 UT - mk5 connection still refused and dimino cannot be killed on rebooted machine. (Ross)
  • 1820 UT - dimino started but field system cannot be resynced due to connection issue. Also, antenna control in timeke shows write error 10054 (Ross)
  • 1830 UT - Katherine withdrawn from experiment until these issues can be resolved. (Ross)
  • 2330 UT - first OK scan 100-2331 delay diff = 0.39 us (Warren)
  • 0108(101) UT - data 544 GB behind scheduled due to late start (Warren)
  • 0151 UT - reconfigured dbbc as fmout-gps drifted slowly but steadily out to 1.4 us (warren)
  • 0202 UT - first scan 101-0202a after dbbc reconf (Warren)
  • 0420 UT - delay diff stable since scan 101-0202a (Warren)
  • 1557 UT - 'ALARM: error m5 -104 mk5cn: time-out, connection closed' error, during scan 101-1557b, everything seems to be running fine now though.

Yarragadee

Module: HOB+0075, start pos 3182.812 GB

  • 1700 UT - Experiment started OK. (Ross)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/r1787.txt · Last modified: 2017/04/11 16:19 by Elizabeth Iles