User Tools

Site Tools



This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1911 [2019/09/09 15:15]
Pradyumna Kiran Kummamuru
handover:r1911 [2019/09/10 10:19] (current)
Pradyumna Kiran Kummamuru
Line 8: Line 8:
    * 1700UT - Experiment started OK (Prad).    * 1700UT - Experiment started OK (Prad).
 +   * Unusually delayed response at the FS to commands entered from erc . Hence, just using the oprin window in the vnc viewer. The disk module graphic in the erc is not updating (Prad).
 +   * 1919UT - Antenna stuck at scan# 252-1928b. Tried '​source=disable',​ '​antenna=open',​ switching drives on and off and rebooting central in the HMI. The schedule restarted at scan# 252-2154b after attempting the reboot multiple times. (Prad).
 +   * 2156UT - scan_check reports mk5 data format problem (letter E issue) for scan# 252-2154b. Will require a module swap if the issue persists (Prad).
 +   * erc displaying wrong DOY and UT.
 +   * 04:52 UT recorded data ahead of scheduled by 112 GB (warren)
 +   * 09:47 UT Waiting at limit for several scans. Field system had forced antenna to limit and would not take new source commands. Restarted the field system and schedule at scan 253-1025a. Scans 253-0953 through 253-1019 not on target (Ross)
 {{tag>}} {{tag>}}
Line 13: Line 20:
/home/www/auscope/opswiki/data/attic/handover/r1911.1568042104.txt.gz · Last modified: 2019/09/09 15:15 by Pradyumna Kiran Kummamuru