User Tools

Site Tools


handover:r4650

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r4650 [2014/08/28 21:21]
David Horsley
handover:r4650 [2014/08/29 14:43] (current)
Imogen Jones
Line 10: Line 10:
 hb: hb:
  
-recording to HOB+0119 at 8692 GB.+recording to HOB+0119 ​start at 8692 GB.
  
 ke: ke:
  
-    *recording to BKG+0126 start 0 GB. Test record OK. After start channels 11, 12 looked suspect in autocorrelation. clock jumped at 19:00. halted schedule and reconfigured dbbc at 19:03. fs crashed also. missed ​one scan 240-1902a. next good scan 240-1916+    *recording to BKG+0126 start 0 GB. Test record OK. 
 +    *After start channels 11, 12 looked suspect in autocorrelation. 
 +    * clock jumped at 19:00. halted schedule and reconfigured dbbc at 19:03. fs crashed also.  
 +    * one missed ​scan 240-1902a. next good scan 240-1916.  (missed scan record stop means -20 GB approx.)
     *clock delay drifted from -0.29 us to -0.4 us around 240/20:30 and has stabilised see ke_ddiff.txt plot     *clock delay drifted from -0.29 us to -0.4 us around 240/20:30 and has stabilised see ke_ddiff.txt plot
 +    * missed scans 240-2312 and 240-2328 due to dbbc reconfig.
 +    * clock delay stable since 240-2330 (as of 240-0315)
  
 +At UT13:40 day 241, the delay difference at Katherine started to drift quite badly, had to run fmset at 13.53UT (Imogen)
  
 +For some reason, gnuplot will not plot values of ke_ddif.txt past ~11:00UT - not sure why (Imogen).
 +
 +At 14:29UT, restarted DBBC as clock drift was still occurring, ran fmset to resync dbbc and mark5. ​ Delay seems to be stable as of 14:42UT, however cannot plot the values as they do not seem to be reaching the ke_ddif.txt file.
  
 yg: yg:
  
-recording to USN-0019 start 0 GB+    *recording to USN-0019 start 0 GB 
 +    *spurious wind stow 240/21:22, antenna will not release elevation brake. Sending Jack from moblas to try handbox antenna alive 
 +    *also note anemometer cant connect to device 
 +    *schedule halted 240/21:36 
 +    *drives still inoperable at 240/23:59 
 +    *restarted for scan 241-0447
/home/www/auscope/opswiki/data/attic/handover/r4650.1409260867.txt.gz · Last modified: 2014/08/28 21:21 by David Horsley