User Tools

Site Tools


This is an old revision of the document!


Hobart 26m

Module: HOB+0096, start pos 6991.943 GB

  • 18:30 UT - Experiment started ok. (Ellen)
  • 00:34UT - Drive PC failed, had to halt the schedule and restart the Drive PC. Scans 282-0031 and 282-0037b are there, but may not be ok. (Imogen)


Module: HOB+0042, start pos 242.307 GB

  • 18:30 UT - Experiment started ok. (Ellen)
  • 00:09 UT - Mark 5 lost connection to Field System, had to halt schedule. SSReset did not reset it, did a hard reboot of Mark 5. Mark 5 did not record from 22:46, lost scans


Module: USN-0204, start pos 0 GB

  • 18:30 UT - Experiment started ok. (Ellen)
  • 21:50 UT - The disc pos is already falling behind, while Ke and Ho are fine. I have noticed that Yg starts recording up to 5 seconds later than it should on some scans. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4708.1444352948.txt.gz · Last modified: 2015/10/09 01:09 by Imogen Jones