User Tools

Site Tools


This is an old revision of the document!


Hobart 12m:

Disk VSN: HOB+0118

Data volume at beginning: 3.9 GB

  • 18:30UT Experiment started OK (Tiege)
  • 00:16UT onsource slewing; never reached the source of scan 092-0004 at 00:04. (Lucia)
Katherine 12m:

Disk VSN: HAY-0010

Data volume at beginning: 1.8 GB

  • 18:30UT Experiment started OK (Tiege)
  • 12:34UT WARNING: error qo -301 warning: onsource status is slewing. (AK)
  • 14:00UT WARNING: error qo -301 warning: onsource status is slewing! (AK)
Yarragadee 12m:

Disk VSN: USN-0109

Data volume at beginning: 1.2 GB

note: during setup for Yarragadee, Mark5 was playing up and not allowing for DIMino to be exited, rebooted using IPS. Seems to be working fine since.

  • 18:30UT Experiment started OK (Tiege)
  • 19:00UT Shortly after experiment start began to get “ALARM: error s5 -104 rfpcn: time-out, connection closed” have restarted Rxmon and Monica, I believe it is resolved. Scans from the first (091-1830b) through to 091-1851 may have been effected. It appears this same problem occured for Nick a few nights ago, may need looking into. (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4733.1459519738.txt.gz · Last modified: 2016/04/01 14:08 by Lucia Plank