User Tools

Site Tools


handover:rd1611

This is an old revision of the document!


rd1611

Hobart 26m:

Disk VSN: HAY-0055

Data volume at beginning:1.2 GBs

  • 17:34UT Experiment started okay (Liz)
  • 17:40UT ERROR qi -302 Last commanded IFD/IF3 attenuations used as default, please modify command. Followed wiki instructions to change attenuation, seem to solve error. (Liz)
  • 17:50UT ERROR 5k -602 SCAN_CHECK missing bytes is not zero. Can't find reference to this on the wiki. No major alarm sounded so feel safe to wait until Jamie takes over. Non-critical? (Liz)
  • 19:40UT System temps have been on the high side ~100 across all bands on and off. Some instances of major overflow in a number of bands but also long periods where they remain in an acceptable range. Monitoring for now. (Liz)
  • 21:30UT turns out system temps were high because the receiver was still on l band. now fixed (Liz)
  • 21:30UT ERROR 5k -602 SCAN_CHECK missing bytes is not zero. THIS IS NOT GOOD. Jamie is trying to fix now. (Liz)
  • 22:00-22:45 Attempted to use jive5ab 7 in2file to fix the problem, but m5test indicates the same problem in the data. Warren and Brett now investigating the connections between the mark4 rack and mark5a unit (JMc)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/rd1611.1480459853.txt.gz · Last modified: 2016/11/29 22:50 by Bryn Emptage