User Tools

Site Tools


handover:t2118

T2118

Hobart 12m:

Disk VSN: HOB+0125

Data volume at beginning: 0 GB

  • 1730UT - Experiment started OK. (Tiege)
  • 1730UT - Same rfpic issue as expected, should not have any impact on data, waiting on hardware for fix. (Tiege)

Katherine 12m:

Disk VSN: HAY-0001

Data volume at beginning: 0 GB

  • 1730UT - Experiment started OK. (Tiege)
  • 1745UT - Following error: “m5 -104 mk5cn: time-out, connection closed”. Everything seems fine with the mk5 currently, it is accepting all commands and appears to be running correctly, if the error triggers again I will restart DIMino. (note: it did not occur during recording) (Tiege)
  • 1932UT - Same error happened again. This time Autocorrelation spectrum is all over the place. Halted schedule, restarted DIMino and restarted schedule. Missed one scan 143-1937, first scan back is 143-1944 (Tiege)
  • 2117UT - mk5cn time-out has happened again. No faulty autocorrelations this time, Overwhelming majority of comments about this error on the wiki suggest it is a benign. Going to leave it unless I see it breaking things. (Tiege)
  • 0321UT - mk5cn time-put during scan 144-0320. No faulty autocorrelations appeared. As per above likely benign, however documented all the same (Jonny)

Yarragadee 12m:

Disk VSN:BKG+0141
note: called Yg and they told me to put this experiment on same module as R1 from previous experiment as they are running low on modules

Data volume at beginning: 1445.493 GB

  • 1730UT - Experiment started OK. (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/t2118.txt · Last modified: 2017/05/24 03:24 by Jonathan Rogers