User Tools

Site Tools


hardware:flexbuff

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hardware:flexbuff [2019/05/21 02:54]
Warren Hankey [2018 Version]
hardware:flexbuff [2019/05/22 00:52] (current)
Warren Hankey [2018 Version]
Line 8: Line 8:
   * When installing debian (stretch), if you need to create a new partition table for the OS disks do not use GPT - this (when combined with RAID) is incompatible with setting the bootable flag and/or installing grub. Use a DOS partition table, mark as for linux RAID & bootable, install the OS to the software RAID and install grub to one or both SSDs.    * When installing debian (stretch), if you need to create a new partition table for the OS disks do not use GPT - this (when combined with RAID) is incompatible with setting the bootable flag and/or installing grub. Use a DOS partition table, mark as for linux RAID & bootable, install the OS to the software RAID and install grub to one or both SSDs. 
   * In the main BIOS, make sure that the HDD boot priority is set to use the SSDs rather than the megaRAID drives. ​   * In the main BIOS, make sure that the HDD boot priority is set to use the SSDs rather than the megaRAID drives. ​
-  * After installing debian, edit /​etc/​apt/​sources.list to use "main contrib non-free"​ sources throughout. Run ''​apt-get update''​ and then ''​apt-get install libfuse-dev emacs nfs-kernel-server tightvncserver libfftw3-dev python iftop iotop wireshark make automake build-essential gfortran x11vnc nfs-kernel-server nfs-common gparted ntp ntpdate pkg-config g++ gfortran bison flex libexpat1-dev fftw3-dev autoconf automake libtool build-essential pgplot5 subversion libopenmpi-dev gv openmpi-bin rpcbind ethtool libpng-dev libx11-dev mlocate bc dnsutils rsync xfsprogs ghostscript-x''​+  * After installing debian, edit /​etc/​apt/​sources.list to use "main contrib non-free"​ sources throughout. Run ''​apt-get update''​ and then ''​apt-get install libfuse-dev emacs nfs-kernel-server tightvncserver libfftw3-dev python iftop iotop wireshark make automake build-essential gfortran x11vnc nfs-kernel-server nfs-common gparted ntp ntpdate pkg-config g++ gfortran bison flex libexpat1-dev fftw3-dev autoconf automake libtool build-essential pgplot5 subversion libopenmpi-dev gv openmpi-bin rpcbind ethtool libpng-dev libx11-dev mlocate bc dnsutils rsync xfsprogs ghostscript-x ​libgsl0-dev''​
   * This should build in the pre-requisites for DiFX, fourfit, jive5ab, etc.    * This should build in the pre-requisites for DiFX, fourfit, jive5ab, etc. 
  
/home/www/auscope/opswiki/data/pages/hardware/flexbuff.txt · Last modified: 2019/05/22 00:52 by Warren Hankey