User Tools

Site Tools


hardware:mark5.conditioning.postconchecks

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hardware:mark5.conditioning.postconchecks [2012/09/05 05:16]
Moblas people
hardware:mark5.conditioning.postconchecks [2014/08/25 01:43] (current)
Imogen Jones
Line 6: Line 6:
 >​vsn? ​ >​vsn? ​
 >vsn? " need to enter twice to get a nice response"​ </​code>​ >vsn? " need to enter twice to get a nice response"​ </​code>​
 +
 +<note warning>​DO NOT use the following procedure if there is data on the module. ​ Please ensure the data has had its data removed BEFORE changing the vsn</​note>​
 +
 Make sure the vsn is the same as the front label on the module. If it has been corrupted, you can change the vsn by entering: <​code>​ Make sure the vsn is the same as the front label on the module. If it has been corrupted, you can change the vsn by entering: <​code>​
 >​protect=off >​protect=off
 >​vsn=XXXsxxxx ​ "eg vsn=BKG-0006"​ </​code>​ >​vsn=XXXsxxxx ​ "eg vsn=BKG-0006"​ </​code>​
 +
 To check the pointers are reset to 0: <​code>​ To check the pointers are reset to 0: <​code>​
 >​protect=off >​protect=off
/home/www/auscope/opswiki/data/pages/hardware/mark5.conditioning.postconchecks.txt · Last modified: 2014/08/25 01:43 by Imogen Jones