User Tools

Site Tools


network

Network connection

IPs

Orig IP Dest Usage
FlexBuff 192.168.1.7 DBBC 3 IF A
FlexBuff 192.168.1.8 DBBC 3 IF B
FlexBuff 192.168.1.9 DBBC 3 IF C
FlexBuff 192.168.1.10 DBBC 3 IF D
FlexBuff 192.168.1.11 DBBC 3 IF E
FlexBuff 192.168.1.12 DBBC 3 IF F
FlexBuff 192.168.1.13 DBBC 2 S-band
FlexBuff 192.168.1.14 [Reserved] Network
dBBC3 192.168.1.15 FlexBuff:46227 IF A
dBBC3 192.168.1.16 FlexBuff:46228 IF B
dBBC3 192.168.1.17 FlexBuff:46229 IF C
dBBC3 192.168.1.18 FlexBuff:46230 IF D
dBBC3 192.168.1.19 FlexBuff:46231 IF E
dBBC3 192.168.1.20 FlexBuff:46232 IF F
dBBC2 192.168.1.21 FlexBuff S-band
dBBC2 192.168.1.22 ? ?

FlexBuff

Flexbuff network settings are defined in /etc/network/interfaces/. New Debian versions tend to label eth0 into ens3f0. The definitions might vary depending on the host machine:

auto eth1
iface eth1 inet static
address 192.168.1.7/24
mtu 9000

dBBC3

Networks settings in the dbbc3 can be defined in the fila10g config file:

ddc_V_core3H_1.fila10g

or in the python configuration script:

# default values (core3h=1,ip_dest=7,net_port=46227)
dbbcComms(sd,'core3h={},destination 0 192.168.1.{}:{}'.format(core3h,ip_dest,net_port))

dBBC2

In the fila10G configuration file (for example: configure_fila10g.aum.sh)

echo “tengbcfg eth0 mac=ba:dc:af:e4:be:e0” | nc -w 1 dbbcho 6789
echo “tengbcfg eth0 ip=192.168.1.21 port=46227 nm=27 gateway=192.168.1.1” | nc -w 1 dbbcho 6789
echo “tengbarp eth0 13 90:E2:BA:C6:9E:58” | nc -w 1 dbbcho 6789
echo “destination 0 192.168.1.13:46236” | nc -w 1 dbbcho 6789

Guifre 2019/09/03 01:41

/home/www/auscope/opswiki/data/pages/network.txt · Last modified: 2019/09/09 06:24 by Guifre