User Tools

Site Tools


network

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network [2019/09/03 05:19]
Guifre
network [2019/09/09 06:24] (current)
Guifre
Line 1: Line 1:
-= Network connection =+====== Network connection ​====== 
 +=== IPs ===
  
 | Orig | IP | Dest | Usage | | Orig | IP | Dest | Usage |
Line 11: Line 12:
 | FlexBuff | 192.168.1.13 | DBBC 2 | S-band | | FlexBuff | 192.168.1.13 | DBBC 2 | S-band |
 | FlexBuff | 192.168.1.14 | [Reserved] | Network | | FlexBuff | 192.168.1.14 | [Reserved] | Network |
-| dBBC3 .  ​| 192.168.1.15 | FlexBuff | IF A | +| dBBC3    | 192.168.1.15 | FlexBuff:​46227 ​| IF A | 
-| dBBC3 .  ​| 192.168.1.16 | FlexBuff | IF B | +| dBBC3    | 192.168.1.16 | FlexBuff:​46228 ​| IF B | 
-| dBBC3 .  ​| 192.168.1.17 | FlexBuff | IF C | +| dBBC3    | 192.168.1.17 | FlexBuff:​46229 ​| IF C | 
-| dBBC3 .  ​| 192.168.1.18 | FlexBuff | IF D | +| dBBC3    | 192.168.1.18 | FlexBuff:​46230 ​| IF D | 
-| dBBC3 .  ​| 192.168.1.19 | FlexBuff | IF E | +| dBBC3    | 192.168.1.19 | FlexBuff:​46231 ​| IF E | 
-| dBBC3 .  ​| 192.168.1.20 | FlexBuff | IF F | +| dBBC3    | 192.168.1.20 | FlexBuff:​46232 ​| IF F | 
-| dBBC2 .  ​| 192.168.1.21 | FlexBuff | S-band | +| dBBC2    | 192.168.1.21 | FlexBuff | S-band | 
-| dBBC2 .  ​| 192.168.1.22 | ? | ? | +| dBBC2    | 192.168.1.22 | ? | ? |
  
 === FlexBuff === === FlexBuff ===
Line 31: Line 31:
  
  
-=== dBBC3  ===+=== dBBC3  ===
  
 Networks settings in the dbbc3 can be defined in the fila10g config file: Networks settings in the dbbc3 can be defined in the fila10g config file:
Line 38: Line 38:
  
 or in the python configuration script: or in the python configuration script:
-  +
-> # Initialise the VDIF header+
 > # default values (core3h=1,​ip_dest=7,​net_port=46227) > # default values (core3h=1,​ip_dest=7,​net_port=46227)
 > dbbcComms(sd,'​core3h={},​destination 0 192.168.1.{}:​{}'​.format(core3h,​ip_dest,​net_port)) > dbbcComms(sd,'​core3h={},​destination 0 192.168.1.{}:​{}'​.format(core3h,​ip_dest,​net_port))
  
-=== dBBC2  ===+=== dBBC2  ===
  
 In the fila10G configuration file (for example: configure_fila10g.aum.sh) In the fila10G configuration file (for example: configure_fila10g.aum.sh)
/home/www/auscope/opswiki/data/attic/network.1567487981.txt.gz · Last modified: 2019/09/03 05:19 by Guifre