User Tools

Site Tools


observing:apod

Notes for July 2016 tracks

  • 7z files a hassle
  • TLE copied to station.tle
  • 200aKe[Yg].vex moved to /usr2/sched
  • edited vex file to change experiment name to 200a rather than 200aKe (or Yg)
  • Ran drudg. Ran satsnapchecker.pl (after editing it for this experiment)
  • Still needed to change proc and sip file names to 200ake[yg]
  • edited proc file to change mk5 mode to 4 Mbps
  • Added checkmk5 procedure
  • Tried 1sec updates. Works but can't stop it with a @ command (not enough time?). 2 sec updates are OK though, so going with them.
  • Added some lines to the start of the snap file to put the antenna at the correct az and el for the start of the track.
  • 2016 07 18 at Ke
    • Started in the wrong Azimuth wrap!
    • 2 sec updates blocked all other FS scheduled commands
    • Went to 5 sec for end of track and some data were recorded
    • Look for data between 10:18:30 and 10:20:30 UT
/home/www/auscope/opswiki/data/pages/observing/apod.txt · Last modified: 2016/07/18 23:57 by Jim Lovell