This is an old revision of the document!
At the prompt, type in the experiment name, e.g.:
RDCTL02 - Reading system control file /usr2/control/skedf.ctl DRUDG: Experiment Preparation Drudge Work (NRV & JMGipson 2008Oct08) Version: 9.10.04 Enter schedule file name (.skd or .drg default <return> if using a .snp file, :: or q to quit) ?r1460
Then select the station (Hb)
Opening file r1460.skd for schedule r1460.skd R1460 $SKED $SOURCES $STATIONS $CODES $HEAD OBS_SORT00 - Sorting scans by time. TTAPE03: Invalid tape type: MARK5B Valid types: SHORT THICK THIN MARK5A K5 This is a geodetic schedule. This is a standard non-Vex schedule file. # of sources: 60 # of stations: 9 # of frequency codes: 1 # of scans: 1046 Stations: Hh (HARTRAO ) Hb (HOBART12) Ho (HOBART26) Kk (KOKEE ) Ny (NYALES20) Tc (TIGOCONC) Ts (TSUKUB32) Wf (WESTFORD) Wz (WETTZELL) Output for which station (type a code, :: or q to quit, = for all) ? Hb
Then choose option 11 to set “Mark5 rack”, “Mark5B recorder”, “No second recorder” and “Start with 1” (i.e. put in the string
16 14 1 1).
Then the procedures and snap file cann be made and a summary printed (options
12, 3 and
5 in sequence).
Printing from drudg does not seem to work at present so the summary was printed using the command
enscript -r -2 /tmp/DR.tmp
After drudging the schedule, the procedure file should be moved to /usr2/proc/. It then has to be edited to remove procedures using non-existent equipment and to support the Mark5B.
vcsx8procedures should be removed in entirety (as the IF power levels and VC settings are set through the DBBC in our system. It may be worth keeping a copy of the vcsx8 settings to confirm the DBBC frequencies required) and the calls to these functions were removed from the setupsx procedure.
define proc_library 10340164352x " R1460 HOBART12 Hb " drudg version 2008Oct08 compiled under FS 9.10.04 "< Mark5 rack >< Mark5B recorder 1> enddef define exper_initi 10340164348x proc_library sched_initi mk5=DTS_id? mk5=OS_rev? mk5=SS_rev? mk5=status? enddef define setupsx 10340181757x tpicd=stop mk5b_mode=ext,0x55555555,2 mk5b_mode bank_check tpicd enddef define preob 10340181757 onsource systemp12 mk5=dot? clkoff enddef