User Tools

Site Tools


operations:documentation.ivs.finishing_v2

This is an old revision of the document!


Finishing an observation

At the end of an observation, the antenna should return to stow and eRemoteControl will bring up a checklist to run through. Here are some notes on the checklist:

After it has, exit from the Field System, by typing the following command in the eRemoteControl operator input window:

terminate

Exit the log monitor program.

If Yarragadee is observing, email the operator to let him know the observation is finished and the telescope has gone to stow at moblas@midwest.com.au

Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, … when finishing an experiment or after hours to save power.

If another experiment follows this one, go to the next step: following on with another observation.

/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.finishing_v2.1346738882.txt.gz · Last modified: 2012/09/04 06:08 by Jim Lovell