This is an old revision of the document!
At the end of an observation, the antenna should return to stow and eRemoteControl will bring up a checklist to run through. Here are some notes on the checklist:
Unless there is another experiment to follow shortly, exit from the Field System by typing the following command in the eRemoteControl operator input window:
Exit the log monitor program.
If Yarragadee is observing (and is not following on), email the operator to let him know the observation is finished and the telescope has gone to stow at email@example.com
Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, … when finishing an experiment or after hours to save power.
If another experiment follows this one, go to the next step: Following on with another experiment