User Tools

Site Tools


operations:documentation.ivs.finishing_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:documentation.ivs.finishing_v2 [2014/08/07 04:31]
Jim Lovell
operations:documentation.ivs.finishing_v2 [2019/02/09 00:41] (current)
Lucas Hyland
Line 4: Line 4:
   * [[operations:​documentation.eRemoteControl_checklist_end|Description of end experiment checklist parameters]]   * [[operations:​documentation.eRemoteControl_checklist_end|Description of end experiment checklist parameters]]
  
-Unless there is another experiment to follow shortly, exit from the Field System by typing the following command in the eRemoteControl operator input window:+If it was an IVS experiment, process logs, comment on the experiment and and send the end of experiment e-mail: 
 + 
 +  * [[operations:​documentation.ivs.commentsfile|Logs and end-of-experiment message instructions]] 
 + 
 +Unless there is another experiment to follow shortly, exit from the Field System by typing the following command in the eRemoteControl operator input window ​**NOTE: Do not do this for ''​hobart''​ the 26m PCFS!**:
 <​code>​terminate</​code>​ <​code>​terminate</​code>​
  
 Exit the log monitor program. Exit the log monitor program.
  
-If Yarragadee is observing (and is not following on), email the operator to let him know the observation is finished and the telescope has gone to stow at auscope-yg@postoffice.utas.edu.au ​+If Yarragadee is observing (and is not following on), email the operator to let him know the observation is finished and the telescope has gone to stow at auscope-yg@list.utas.edu.au ​
  
-If this is the last experiment of the week and there is a gap of a day or more until the next experiment, please ​reboot ​the PCFS computer. To do this: +<note important>​Note:​ it is no longer necessary to reboot PCFS computers at the end of experimentsDo not turn off ops8 either! </​note>​
-  * open a terminal on pcfs[ho|ke|yg] as ''​oper''​ +
-  * type ''​su''​ +
-  * (type in the root password) +
-  * type ''​reboot''​ +
-It will take a couple ​of minutes to rebootYou'll need to manually start the VNC server next: +
-  * open a terminal on pcfs[ho|ke|yg] as ''​oper''​ +
-  * type ''​vncserver''​ +
-  * log out with an ''​exit''​+
  
 Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, ... when finishing an experiment or after hours to save power. Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, ... when finishing an experiment or after hours to save power.
  
 If another experiment follows this one, go to the next step: [[operations:​documentation.ivs.newstart_v3_fs9.10.5|Following on with another experiment]] If another experiment follows this one, go to the next step: [[operations:​documentation.ivs.newstart_v3_fs9.10.5|Following on with another experiment]]
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.finishing_v2.1407385897.txt.gz · Last modified: 2014/08/07 04:31 by Jim Lovell