User Tools

Site Tools


operations:documentation.ivs.finishing_v2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation.ivs.finishing_v2 [2019/02/09 00:40]
Lucas Hyland
operations:documentation.ivs.finishing_v2 [2019/02/09 00:41] (current)
Lucas Hyland
Line 11: Line 11:
 <​code>​terminate</​code>​ <​code>​terminate</​code>​
  
-Exit the log monitor program. ​Do not turn off ops8!+Exit the log monitor program.
  
 If Yarragadee is observing (and is not following on), email the operator to let him know the observation is finished and the telescope has gone to stow at auscope-yg@list.utas.edu.au ​ If Yarragadee is observing (and is not following on), email the operator to let him know the observation is finished and the telescope has gone to stow at auscope-yg@list.utas.edu.au ​
  
-<note important>​Note:​ it is no longer necessary to reboot PCFS computers at the end of experiments</​note>​+<note important>​Note:​ it is no longer necessary to reboot PCFS computers at the end of experiments. Do not turn off ops8 either! ​</​note>​
  
 Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, ... when finishing an experiment or after hours to save power. Please power-down the stairwell monitors using the switches under the main desk labelled Screen 1, Screen 2, ... when finishing an experiment or after hours to save power.
  
 If another experiment follows this one, go to the next step: [[operations:​documentation.ivs.newstart_v3_fs9.10.5|Following on with another experiment]] If another experiment follows this one, go to the next step: [[operations:​documentation.ivs.newstart_v3_fs9.10.5|Following on with another experiment]]
/home/www/auscope/opswiki/data/pages/operations/documentation.ivs.finishing_v2.txt · Last modified: 2019/02/09 00:41 by Lucas Hyland