User Tools

Site Tools


operations:documentation.ivs.timingsw

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:documentation.ivs.timingsw [2013/08/28 00:39]
Jim Palfreyman Inserted command for vnc
operations:documentation.ivs.timingsw [2017/05/30 06:29] (current)
Patrick Yates
Line 1: Line 1:
 ====== Software on the timing PC ====== ====== Software on the timing PC ======
  
-On the timing PC Desktop (on ops2 run **vncviewer time[hb|ke|yg]:​0**),​ check to see if the following software is running by looking for the following application names in the Windows toolbar at the bottom of the screen. Notes on starting them if they'​re not running can be found by following the links:+On the timing PC Desktop (Use Applications menu or on ops2 run **vncviewer time[hb|ke|yg]:​0**),​ check to see if the following software is running by looking for the following application names in the Windows toolbar at the bottom of the screen. Notes on starting them if they'​re not running can be found by following the links:
  
-  * Maser: 
-    * [[software:​maser_server|H-server]] 
-    * [[software:​hmanager|Standard VCH-1005A Manager]] 
   * [[software:​hmi|HMI]] ("UoT 12m ANTENNA - xxxx")   * [[software:​hmi|HMI]] ("UoT 12m ANTENNA - xxxx")
   * [[software:​tac32plus|Tac32Plus]]   * [[software:​tac32plus|Tac32Plus]]
   * [[software:​anemo|AneMonitor]]   * [[software:​anemo|AneMonitor]]
 +
 +Maser monitoring software runs on a different pc:
 +
 +  * Maser:
 +    * [[software:​maser_server|H-server]]
 +    * [[software:​hmanager|Standard VCH-1005A Manager]]
/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.timingsw.1377650395.txt.gz · Last modified: 2013/08/28 00:39 by Jim Palfreyman