User Tools

Site Tools


operations:documentation:lba_observing_software_setup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation:lba_observing_software_setup [2013/03/14 02:53]
Jim Lovell
operations:documentation:lba_observing_software_setup [2013/03/14 03:17] (current)
Jim Lovell
Line 10: Line 10:
 </​code>​ </​code>​
 If the observation is being monitored from the AuScope control room, use e-remote control can be used as the Field System interface, but generally the VNC sessions are fine.  If the observation is being monitored from the AuScope control room, use e-remote control can be used as the Field System interface, but generally the VNC sessions are fine. 
 +
 +If it's not already running, start the System Monitor, one for each AuScope telescope. On newsmerd:
 +<​code>​
 +~/​bin/​monitor_system.pl
 +</​code>​
  
 <note important>​If you can't connect to the DBBC VNC server, the DBBC may have died. In which case, follow these notes on [[operations:​documentation:​dbbc_restart|Recovering from a DBBC Failure]]</​note>​ <note important>​If you can't connect to the DBBC VNC server, the DBBC may have died. In which case, follow these notes on [[operations:​documentation:​dbbc_restart|Recovering from a DBBC Failure]]</​note>​
Line 26: Line 31:
   * [[operations:​documentation:​fs_antenna_9.10.5|Some notes on antenna control and monitoring]] using the new version of the Field system   * [[operations:​documentation:​fs_antenna_9.10.5|Some notes on antenna control and monitoring]] using the new version of the Field system
  
-=== System Monitor === 
-On newsmerd, start the system monitor for the antenna: 
-<​code>​ 
-~/​bin/​monitor_system.pl 
-</​code>​ 
  
 === RF and IF signal path === === RF and IF signal path ===
Line 78: Line 78:
  
 If all is set up, it's time to [[operations:​documentation:​lba_starting_and_monitoring|start and monitor the observations]]. If all is set up, it's time to [[operations:​documentation:​lba_starting_and_monitoring|start and monitor the observations]].
- 
/home/www/auscope/opswiki/data/pages/operations/documentation/lba_observing_software_setup.txt · Last modified: 2013/03/14 03:17 by Jim Lovell