User Tools

Site Tools


operations:documentation_cont14_module_swap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation_cont14_module_swap [2014/09/04 14:03]
liza
operations:documentation_cont14_module_swap [2014/11/25 03:35] (current)
Jim Lovell
Line 11: Line 11:
   * You will want to continue with the old, partially filled module, so confirm you have the right one with a <​code>​mk5=vsn?</​code>​ and if it isn't, change to the correct one with a <​code>​mk5=bank_set=inc</​code>,​ wait about 10 sec, then do and another <​code>​mk5=vsn?</​code>​   * You will want to continue with the old, partially filled module, so confirm you have the right one with a <​code>​mk5=vsn?</​code>​ and if it isn't, change to the correct one with a <​code>​mk5=bank_set=inc</​code>,​ wait about 10 sec, then do and another <​code>​mk5=vsn?</​code>​
   * Make a note in the log that a new module has been inserted into Bank A or B, and say which bank is currently active. Please include VSN codes in the message and in the table on the [[operations:​documentation_austral15day_overview#​module_usage|Module usage page]] page.   * Make a note in the log that a new module has been inserted into Bank A or B, and say which bank is currently active. Please include VSN codes in the message and in the table on the [[operations:​documentation_austral15day_overview#​module_usage|Module usage page]] page.
-  * Send an email to transfers@postoffice.maths.utas.edu.au so that we know what's happened+  * Send an email to auscope-operations@list.utas.edu.au so that we know what's happened
  
 Note that you can view the Mark5 recorder and the status of the modules remotely using the control room Pan-Tilt-Zoom (PTZ) web cameras: Note that you can view the Mark5 recorder and the status of the modules remotely using the control room Pan-Tilt-Zoom (PTZ) web cameras:
/home/www/auscope/opswiki/data/pages/operations/documentation_cont14_module_swap.txt · Last modified: 2014/11/25 03:35 by Jim Lovell