User Tools

Site Tools


operations:documentation_ops2_pcfs9.10.5plus

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:documentation_ops2_pcfs9.10.5plus [2019/07/10 04:58]
Warren Hankey
operations:documentation_ops2_pcfs9.10.5plus [2019/07/10 05:04] (current)
Warren Hankey
Line 212: Line 212:
 ==Setup of Telescope:​== ==Setup of Telescope:​==
  
-**Step 1.** Open a VNC viewer to newsmerd <​code>​vncviewer newsmerd:​1</​code> ​ The password is the usual one. (hobart26 FS runs on computer named hobart). If this is not accessible ssh to observer@newsmerd then restart the vnc with <​code>​x11 -shared ​-alwaysshared -forever -usepw -display :1 & </​code>​+**Step 1.** Open a VNC viewer to newsmerd <​code>​vncviewer newsmerd:​1</​code> ​ The password is the usual one. (hobart26 FS runs on computer named hobart). If this is not accessible ssh to observer@newsmerd then restart the vnc with <​code> ​vncserver :1 -shared & </​code>​
  
 **Step 2.** Check that the field system is running on newsmerd. ​ Usually, the Geodesy window will be Desktop 4. If it is not running, please start it with ''​fs-mk5hb''​ to ensure that the geodetic backend is selected. ​ **Step 2.** Check that the field system is running on newsmerd. ​ Usually, the Geodesy window will be Desktop 4. If it is not running, please start it with ''​fs-mk5hb''​ to ensure that the geodetic backend is selected. ​
/home/www/auscope/opswiki/data/pages/operations/documentation_ops2_pcfs9.10.5plus.txt · Last modified: 2019/07/10 05:04 by Warren Hankey