User Tools

Site Tools


This is an old revision of the document!

Monitoring of R1 e-transfers

R1 and R4 are the IVS “Rapid” experiments meaning their turnaroud time (from observation to the ready product) should be less than 15 days. They supply fast EOP results. R1 data are correlated in Bonn, Germany, and it is sent there by e-transfer. More about rapids can be found here:

AuScope normally observes R1's on Tuesdays. The data from the remote stations is sent down to Hobart to be transferred. Shipment of the modules may take up to 5 working days, meaning the Ke and Yg modules arrive next week. Thus, in order to facilitate the timely delivery of the data to the correlator, we have to act as fast as we can with those modules, that's where we need help of the observers.

Data transfer consists of two stages: 1) module-RAID and 2) RAID-correlator. Observers monitor the longest and most wulnerable second stage. Data on th RAID is stored as it was recorded, in a form of separate files each containing one scan. The tsunami UDP transfer protocol is used to send the files to the RAIDS at Bonn correlator. Tsunami server breaks data into 32kb numbered blocks and sends them consequtively, communicating with the remote host over TCP about the reception of each block. Based on the hosts report, blocks can be resend. More about tsunami can be found here:

/home/www/auscope/opswiki/data/attic/operations/monitoring.ivs.etransfer.1427229627.txt.gz · Last modified: 2015/03/24 20:40 by liza