User Tools

Site Tools


operations:monitoring.ivs.etransfer

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
operations:monitoring.ivs.etransfer [2015/03/25 13:26]
liza
operations:monitoring.ivs.etransfer [2015/03/26 20:52] (current)
liza
Line 9: Line 9:
  
 **How to monitor e-transfers:​** **How to monitor e-transfers:​**
-There are two options: either have the transfer window running somewhere on the screen during all the time of your shift, or check it roughly every two hours together with the check lists. In any case, the procedure is the following + 
-  ​+If on top of the page of Handover Notes you see the following text: 
 + 
 + 
 + 
 + 
 +<note important>​**Achtung! R1 TRANSFER IN PROGRESS! MONITORING REQUIRED!**</​note>​ 
 +R1 monitoring instructions:​ [[operations:​monitoring.ivs.etransfer|operations:​monitoring.ivs.etransfer]] 
 + 
 + 
 + 
 +There are two options: either have the transfer window running somewhere on the screen during all the time of your shift, or check it roughly every two hours together with the check lists. In any case, the procedure is the following:
   - Open terminal on ops1, ops2 or ops4   - Open terminal on ops1, ops2 or ops4
   - Start the VNC session with the Vortex machine where the transfers happen: <​code>​ vncviewer vortex:1 </​code>​ (if for some reason you observe from your desktop or the home machine, you will need show the full path to vortex: <​code>​ vncviewer vortex.phys.utas.edu.au:​1 </​code>​   - Start the VNC session with the Vortex machine where the transfers happen: <​code>​ vncviewer vortex:1 </​code>​ (if for some reason you observe from your desktop or the home machine, you will need show the full path to vortex: <​code>​ vncviewer vortex.phys.utas.edu.au:​1 </​code>​
-  - Go to the Workspace 3 where the IVS transfers happen (NOTE: do not interfere with Workspace 1 and 2!)+  - Go to the Workspace 3 where the IVS transfers happen (**NOTE: do not interfere with Workspace 1 and 2!**)
   - Look at the two top windows: top left is a remote host, top right is a server. ​   - Look at the two top windows: top left is a remote host, top right is a server. ​
       * Is the transfer running?       * Is the transfer running?
/home/www/auscope/opswiki/data/attic/operations/monitoring.ivs.etransfer.1427290004.txt.gz · Last modified: 2015/03/25 13:26 by liza