User Tools

Site Tools


operations:rf_if_check

RF and IF Configuration

Check the Status Monitor to see if the Cross-over switches and RCP IF Attenuators are at the default levels:

  • At all sites, cross-over switches should be Direct
  • IF Attenuator settings should be as follows
    • At Hobart:
      • S RCP : 0.0 dB
      • X RCP : 12.0 dB
    • At Katherine
      • S RCP : 15.5 dB
      • X RCP : 8.5 dB
    • At Yarragadee
      • S RCP : 3.0 dB
      • X RCP : 0.0 dB

If these values are not correct, they will need adjusting. See: Current Issues - Crossover Switches at Katherine

/home/www/auscope/opswiki/data/pages/operations/rf_if_check.txt · Last modified: 2013/02/12 03:03 by jayb