User Tools

Site Tools


operations:starting_monitoring_9.10.5

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
operations:starting_monitoring_9.10.5 [2016/11/24 21:11]
Bryn Emptage [Antenna control and monitoring]
operations:starting_monitoring_9.10.5 [2017/06/23 03:24] (current)
Arwin Kahlon [Antenna stuck]
Line 67: Line 67:
 When the antenna is stuck, launch the VNC to the timepc and go to the antenna control window. Look for red buttons there. Set the schedule to halt in the fs input. You can turn on/ff the antenna manually from operate/​standby,​ switch Drives on/off. If necessary, do the RESETS at the bottom.  ​ When the antenna is stuck, launch the VNC to the timepc and go to the antenna control window. Look for red buttons there. Set the schedule to halt in the fs input. You can turn on/ff the antenna manually from operate/​standby,​ switch Drives on/off. If necessary, do the RESETS at the bottom.  ​
  
 +After turning the drives on, it is recommended to wait a little while before putting the antenna in '​operate'​. This step is crucial if the previous steps haven'​t resolved the issue.
  
 ==== DBBC Crash: ERROR db -21.... ==== ==== DBBC Crash: ERROR db -21.... ====
/home/www/auscope/opswiki/data/pages/operations/starting_monitoring_9.10.5.txt · Last modified: 2017/06/23 03:24 by Arwin Kahlon