User Tools

Site Tools


operations:temphumidmonitor_rpisetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

operations:temphumidmonitor_rpisetup [2019/03/25 21:21]
Jim Lovell created
operations:temphumidmonitor_rpisetup [2019/05/13 23:10] (current)
Jim Lovell [Network config]
Line 13: Line 13:
   * For masertempke the IP address should be 131.217.61.28.   * For masertempke the IP address should be 131.217.61.28.
   * For antennatempke the IP address should be 131.217.61.29.   * For antennatempke the IP address should be 131.217.61.29.
 +  * For antennatempyg the IP address should be 131.217.61.80.
 +  * For antennatemphb the IP address should be 131.217.63.4.
  
 Edit ''/​etc/​dhcpcd.conf'':​ Edit ''/​etc/​dhcpcd.conf'':​
 +
 +For Katherine or Yarragadee:
  
 <​code>​ <​code>​
Line 21: Line 25:
 # /26 = netmask of 255.255.255.192 # /26 = netmask of 255.255.255.192
 static routers=131.217.61.1 static routers=131.217.61.1
 +static domain_name_servers=131.217.0.19
 +</​code>​
 +
 +For Hobart:
 +<​code>​
 +interface eth0
 +static ip_address=131.217.63.4/​24
 +static routers=131.217.63.1
 static domain_name_servers=131.217.0.19 static domain_name_servers=131.217.0.19
 </​code>​ </​code>​
Line 27: Line 39:
  
 Reboot. Reboot.
- 
 ==== Packages installed ==== ==== Packages installed ====
  
 [[operations:​temphumidmonitorrpi|Configuring Raspberry Pis for Temperature and Humidity monitoring]] [[operations:​temphumidmonitorrpi|Configuring Raspberry Pis for Temperature and Humidity monitoring]]
/home/www/auscope/opswiki/data/pages/operations/temphumidmonitor_rpisetup.txt · Last modified: 2019/05/13 23:10 by Jim Lovell