User Tools

Site Tools


operations:van_setting

Setting VSN labels

DO NOT use this procedure if there is already data on the module. It will erase the data

If the VSN reported by e-Remote control doesn't agree with the sticker, do the following:

First make sure you have the correct module selected, then…

If the bar-coded label says, for example “HOB+0056”, at e-Remote Control prompt:

mk5=protect=off
mk5=vsn=HOB+0056
mk5=vsn?

The last command should return the label name, disk capacity (in GB) and block size. Confirm that this agrees with the label.

/home/www/auscope/opswiki/data/pages/operations/van_setting.txt · Last modified: 2014/08/25 01:46 by Imogen Jones