User Tools

Site Tools


software:anemo

This is an old revision of the document!


Anemometer software

Eash site is equipped with an anemometer. If the wind speed passes pre-set limits, a signal is sent directly to the antenna to send it to stow. This software does not need to be running for this to happen but it is a good idea to have it running so you can monitor conditions and the stow state.

To start the software, double-click on the “Anemometer” icon on the desktop, then select “Options → Connect to Device”. When a dialog appears with a default IP address, click Done.

Look for a green “Connected” message. If you see a red “Not Connected”, wait a while to see if it connects. If not, re-start the software. You can choose between a 30s average or instantaneous readout.

/home/www/auscope/opswiki/data/attic/software/anemo.1319611032.txt.gz · Last modified: 2014/03/17 06:20 (external edit)