User Tools

Site Tools


software:yg_9.11.2_to_9.11.3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

software:yg_9.11.2_to_9.11.3 [2013/07/25 04:31] (current)
Jim Lovell created
Line 1: Line 1:
 +====== 9.11.2 to 9.11.3 at Yg ======
  
 +<​code>​
 +state before upgrade:
 +
 +
 +drwxr-xr-x 13 prog rtx       4096 2012-10-18 14:41 20121017eremotectrl_deliverable_nosvn
 +drwxr-xr-x 10 prog rtx       4096 2012-10-18 14:41 AuscopeUtils
 +-rw-r--r-- ​ 1 prog rtx  377354240 2012-11-22 14:23 backup_2012_11_22_save.tar
 +lrwxrwxrwx ​ 1 prog rtx         23 2013-06-06 14:23 control -> control.yg-9.10.5_ifpic
 +drwxr-xr-x ​ 5 prog rtx       4096 2012-11-22 14:28 control.hb
 +drwxr-xr-x ​ 3 prog rtx       4096 2013-06-05 11:50 control.ho
 +drwxr-xr-x ​ 2 prog rtx       4096 2013-06-05 11:50 control_ifpic
 +drwxr-xr-x ​ 5 prog rtx       4096 2012-11-22 14:28 control.ke
 +drwxrwxr-x ​ 5 prog rtx       4096 2012-11-22 14:28 control.yg
 +lrwxrwxrwx ​ 1 prog rtx         10 2012-10-16 15:10 control.yg.9.10.4 -> control.yg
 +drwxrwxrwx ​ 6 prog rtx       4096 2012-10-18 09:26 control.yg-9.10.5
 +drwxr-xr-x ​ 5 prog rtx       4096 2012-10-16 15:09 control.yg.9.10.5
 +drwxr-xr-x ​ 5 prog rtx       4096 2013-06-06 15:12 control.yg-9.10.5_ifpic
 +drwxr-xr-x ​ 9 prog rtx       4096 2010-11-15 16:04 econtrol
 +lrwxrwxrwx ​ 1 prog rtx         37 2012-10-18 14:42 eremotectrl -> 20121017eremotectrl_deliverable_nosvn
 +drwxr-xr-x 13 prog rtx       4096 2013-02-09 02:53 eremotectrl_deliverable
 +drwxr-xr-x 13 prog rtx       4096 2012-08-14 16:34 eremotectrl.old
 +lrwxrwxrwx ​ 1 root root         9 2013-06-05 12:11 fs -> fs-9.11.2
 +drwxr-xr-x 85 prog rtx       4096 2010-11-15 16:04 fs-9.10.4
 +drwxr-xr-x 89 prog rtx       4096 2012-09-26 09:47 fs-9.10.5
 +drwxr-xr-x 89 prog rtx       4096 2013-01-18 03:30 fs-9.11.2
 +-rw-r--r-- ​ 1 prog rtx    8634845 2012-10-16 15:17 fsnew.tgz
 +-rw-r--r-- ​ 1 prog rtx       4851 2013-06-06 15:44 fs_upgrade_05Jun2013_JEJL.txt
 +-rw-r--r-- ​ 1 prog rtx       4027 2013-06-06 12:08 fs_upgrade_05Jun2013_JEJL.txt~
 +-rw-r--r-- ​ 1 prog rtx     ​196971 2013-06-06 12:08 fs_upgrade_16Oct2012_JEJL_2.txt
 +-rw-r--r-- ​ 1 prog rtx     ​200704 2012-10-16 16:28 fs_upgrade_16Oct2012_JEJL_2.txt~
 +drwxrwxrwx ​ 3 oper rtx       4096 2013-07-22 12:38 log
 +drwxr-xr-x ​ 5 prog rtx       4096 2011-08-05 16:09 oMlog
 +drwxr-xr-x 39 oper rtx      20480 2013-07-24 15:53 oper
 +lrwxrwxrwx ​ 1 oper rtx         14 2012-10-16 15:21 proc -> proc.yg-9.10.5
 +drwxr-xr-x ​ 2 oper rtx       4096 2012-10-03 11:31 proc.9.10.4
 +drwxrwxrwx ​ 2 prog rtx       4096 2013-07-24 15:53 proc.yg-9.10.5
 +drwxr-xr-x ​ 4 prog rtx       4096 2013-07-25 11:19 prog
 +drwxrwxrwx ​ 2 oper rtx      12288 2013-07-22 12:26 sched
 +lrwxrwxrwx ​ 1 root root        21 2013-06-05 12:11 st -> st-0.0.1-9.10.5_ifpic
 +drwxr-xr-x 15 prog rtx       4096 2012-05-16 13:21 st-0.0.0
 +drwxr-xr-x 29 prog rtx       4096 2012-10-17 00:39 st-0.0.1-9.10.5
 +drwxr-xr-x 34 prog rtx       4096 2013-06-06 12:04 st-0.0.1-9.10.5_ifpic
 +-rw-r--r-- ​ 1 prog rtx       1679 2013-03-06 15:46 yarragadee_rsa
 +
 +
 +
 +as prog:
 +cd /usr2
 +git pull origin master
 +
 +1.  copy control files to new directory:
 +mkdir control.yg-9.11.3
 +cp -rp control/* control.yg-9.11.3/​
 +Make these the default
 +ln -sfn control.yg-9.11.3 control
 +
 +
 +2. unpack new version
 +
 +
 +su
 +cd / 
 +tar xzpvf /​home/​prog/​fs-9.11.3.tgz
 +cd /usr2 
 +ln -sfn fs-9.11.3 fs
 +exit
 +
 +
 +3. Now as prog 
 +4. build fs
 +cd fs
 +make
 +
 +5. re-build st
 +cd /usr2/st
 +make rmdoto rmexe all
 +
 +6. as root
 +cd /​usr2/​eremotectrl
 +make clean
 +make build
 +make install
 +
 +7. reboot
 +
 +8. Log in as oper
 +cd /​usr2/​control
 +
 +added the following to skedf.ctl:
 +
 +* DBBC target values for IF counts in set-up procedure, up to 4
 +* values for up to four IFs, in order, this will cause an error
 +* in IFx=... command execution if used for DBBC DDC versions
 +* before v101
 +* default is nulls if not present
 +dbbc_if_targets ​ 25000 25000 35000 35000
 +*--------------------------------------------------------------
 +* DBBC BBC TPI target levels
 +* has no effect for DDC versions before v103
 +* default is null if not present
 +dbbc_bbc_target 16000
 +
 +cd /usr2/proc
 +modified station.prc as follows:
 +     (F) This step is only for stations with DBBCs that are updating
 +         from previous version of 9.11.x, x=0, 1, or 2. Three changes
 +         are needed to the station.prc library:
 +
 +         ​(i) ​  ​Please insert the command "​bbc_gain=all,​agc"​ at the end
 +               of your SETUPA procedure. ​ This command is a "​no-op"​
 +               for DDC version less than v103, but including it is
 +               ​recommended that be added for future backward
 +               ​compatibility. ​ For stations with v104 or higher, as
 +               ​additional parameter specifying the target count level
 +               can be added if it is desired, e.g.,
 +               "​bbc_gain=all,​agc,​16000"​
 +
 +         ​(ii) ​ Add the procedure "​BBC_LEVEL"​ to your station.prc
 +               ​library. ​ This can probably done most easily with the
 +               ​following commands:
 +
 +                 cd /usr2/proc
 +                 cp /​usr2/​fs/​st.default/​proc/​bbc_level.prc .
 +                 pfmed
 +                   ​st,​bbc_level::​bbc_level,​bbc_level
 +                   ex
 +                 rm bbc_level.prc
 +
 +         (iii) This step is only for stations with non-continuous cal and has
 +               two parts.
 +
 +               (a) Edit the CALTSYS_MAN procedure and insert the command
 +                   "​bbc_gain=all,​man"​ right after the "​IFMAN"​ command.
 +
 +               (b) Edit the CALTSYS procedure and insert the command
 +                   "​bbc_gain=all,​agc"​ right after the "​IFAGC"​ command.
 +
 +
 +</​code>​
/home/www/auscope/opswiki/data/pages/software/yg_9.11.2_to_9.11.3.txt · Last modified: 2013/07/25 04:31 by Jim Lovell