aov010

Hobart 26m:

Disk VSN: NTO+0044

Data volume at beginning: 0 Gb

During setup: Telescope drives had to be manually reset, mk5ho was unresponsive and had to be revived by Jamie M.
18:00 UT Experiment started on time (Arwin)
18:00 UT Gave the following error twice “ERROR m5 -104 mk5cn: time-out, connection closed”. Everything seems to be fine, will keep an eye (Arwin)
18:31 UT Getting the follwoing two errors “error di -400 if module position exceeds number of conditioning modules” and “error sp -13 this command not supported for your equipment, check equip.ctl.” quite a bit. Wiki is no help on this. Turns out they were beingn, a result of using the DBBC as the backend as opposed to mkV. (Arwin)
19:24 UT Noticed that the sum file has not been created in sched.tmp (forgot to mention this during handover -Arwin). Tried manually drudging the skd file in the tmp folder but to no avail. (Arwin)
19:26 UT Disk_pos at 330.901, unable to check as I cannot find the sum file.(Arwin)
22:42 UT Total data recorded = 1047.053 GB. (Arwin)
22:43 UT The sys temps were in their thousands when the telescope was on a really low elevaltion source. (Arwin)
11:34 UT 26m removed from wind stow. Recording as normal. (Bryn)
15:53 UT System temps were also in thousands here. (Liz)

Katherine 12m:

Disk VSN: HOB+0107

Data volume at beginning: 854.53

17:45 UT Reconfigred the DBBC, resynced fmset to bring mk5=dot under control. (Arwin)
18:07 UT Experiment started 7 mins late due to the above issues. First valid data was was for scan 2019-1819, source 2101-490 at 18:19:38 UT. Missed about 31 Gb (Arwin)

Yarragadee 12m:

Disk VSN:HOB+0118

Data volume at beginning: 750.591

~~DISCUSSION~~