This is an old revision of the document!


AOV063

Hobart 12m

Disk VSN: Flexbuff-2hb

  • Reset, Reconig and finally Power cycled dbbc3hb couple of times, but 2-3 delay corr are still continuously bad. Can't do much at this point.
  • 1814UT Experiment Started late because of flexbuff recording issue. it wasn't doing doing the recording. Had to kill the fs and restart it again. after that flexbuff was happy and started recording. Weird issue. (Jay)
  • 2240UT: IFA/IFB changed to record S-band data - previously had been connected to the 3-7 GHz VGOS band. This was toggled through the pduhb.phys.utas.edu.au web interface (JMc)

Katherine 12m

Disk VSN: Flexbuffke

  • {Same as Hb} After Reconig and finally Power cycled dbbc3ke couple of times, but delay corr for IF 'F' is still bad.
  • 1817UT Experiment Started late because of flexbuff recording issue. it wasn't doing doing the recording. Had to kill the fs and restart it again. after that flexbuff was happy and started recording. (Jay)
  • Recorded file labels are inconsistent (a,b,c,d rather than sx,sy,xx,xy). Due to multiple datastream definitions. setup procedures editing to avoid this issue in the future.

Yarragadee 12m

Disk VSN: HOB+0114 | Data volume at beginning: 1054.855 GB

  • 1800UT Experiment started okay (Jay).